External Mini SAS Cable SFF-8088 to SFF-8088 6m

 external Mini SAS cable SFF-8088 to SFF-8088 6m  

 Basic introduction

SAS line  

SAS connector applications – SAS HBA / RAID card, SAS hard disk / tape drives, disk backplane, SAS enclosure (RAID / JBOD)  

SAS connector specification – SATA Style (SATA style), SFF-8482, SFF-8484, SFF-8470; SFF-8087, SFF-8088, SFF-8643 and SFF-8644  

 1 Install / Remove the SAS cable  

 1.1 installation steps  

Step 1: SAS cable connector is inserted into the device side connector, cable terminal connector with anti-anti-card slot, insert the need to ensure that the cable end is connected with both the device side connector slot match.  

Step 2: Push the connector until a “click” sound connections, the connection is in place, SAS cables in place  

 1.2 steps taken  

Step 1: Hold the cable connector and cable pull ring,  

Step 2: Pull the tab, so that the hook pops up.  

Step 3: Pull out the connector.  

 2 speed control cable minimum bend radius measured:    

cable specifications for 6m; cable reference diameter of 10mm, minimum bend radius of 50mm;     

cable specifications for 3m; cable reference diameter of 8.6mm, the minimum bend radius of 40mm;     

cable specifications for 

3 Installation Notes:  

1, non-bending  

2, non-reversing connector  

3, controlled bending diameter  

2, cable minimum bend radius requirements